The lab report should be written based on the lab template provided with an abstract, introduction and the methods for each tensile, torsion and impact experiment. The Al_1, High carbon steel_1 and mild steel_1 show results for tension and these should be plotted on python and each one should have the Young’s modulus printed. The three following torsion graphs should likewise be plotted with the Shear modulus being printed as well as the toughness using the trapezium rule. The energy released for the impact tests should be plotted. The results should be written out and then a discussion which explains which materials are appropriate for the rod and pin as well as the dimensions they should be.