Get help from the best in academic writing.

ECOM 421 Saudi University Business Strategies & Business Models Discussion

ECOM 421 Saudi University Business Strategies & Business Models Discussion.

q Ensure that you follow APA referencing style for referencing any sources.q The Submitted Assignment must respect the name file: Student Name_ID_CRNq Use Font Times New Roman, 12 Font size,q Use 1.5 Paragraph line spacing with adjust to all paragraphs (Justified alignment) q Use Footer function to insert page numberq Number of words per answer (Minimum 250 Words limit for your each answer).q The Submitted Assignment must be in MS Word Format.q Write your answer by labelling answer number for each of the question.q You must check the spelling and grammar mistakes before submitting the assignment.q 20% of the total grade will be deducted for providing a poor structure of the assignment. For example, if the assignment is marked out of 15, the student provided an excellent content and answer that met all the requirements of the assignment’s question with poor writing structure. Then the student will get 15 based on the content and you will deduct up to 20% (3 marks) from the total grade (5% for paper style, 5% spelling and grammar errors, 5% for referencing and 5% for word count).q A ZERO will be given to any submission that includes copying from other colleague’s assignment.q Plagiarism of your answer will be not accepted at any cost. Write your answer using your own words and use proper APA style of referencing wherever necessary.
ECOM 421 Saudi University Business Strategies & Business Models Discussion

The Four Major Types of Firm in the U.S.. What are the four major types of firm in the U.S, how are they defined, and what are the key differences between them? In sole proprietorships, the business is owned by a single owner. In partnerships, business is owned and run by more than one owner. In a limited liability company, partners own the company but have limited liability. Apart from these three firms, the corporation is a legal entity, separate from the owners, and is solely responsible for the it’s own obligations but not the employees or the customers whereas in the other three organizational forms, owners are not different from the business and for any other obligations, they themselves are responsible. Ch. 1 – 1P Corportations Advantages: In corporation, there is no limitation on owning the shares of the stock The Corporation provides free and anonymous trading system Corporation gives rising capital very easily than other firm types Sole Proprietorships Partnerships Limited Liability Companies: A limited liability company is the form of corporate structure which has the element of partnership with limited liability. Limitited liability to the owners to the extent of their share in the business, if anything happens which is not expected then the owners liability will not pass to their own assets. The limited liability company is a limited partnership without general partner. The members have limited liability, but the business can run by them as managing members. It is a business organization that has some of the apects of a corporation with those of a sole proprietorship. The meaning of Limited Liability in a corporate context is that the liability faced by the owners is limited. That means, in a limited liability partnership, the firm could not have a right to use the owner’s personal property to pay off outstanding debts. The owners have limited liablility based on their investment and the maximum liability owners have is their investment in the company. How can corporate bankruptcy be viewed as a change in firm ownership? Describe why a corporation would want to file for bankruptcy as well as the benefits and drawbacks of such a decision. Ch1.2 – 3CC A corporation gathers its preliminary funds by selling its stocks. The owners who aquire these shares are called the shareholders or equity holders. In the porecess of expansion or acquisitions, a corporation often borrows funds from outsiders. In such cases, the debtors become the investors in the firm. However, the ownership of the corporation rests with the equity holders. In case of its inability to pay back the funds to its debtors, a firm may file for bankruptcy. Bankruptcy does not necessarily bring about a closure to the existing businesses of a corporation. It reflects the inability of the firm to satisfy the claims of the people from whom the funds were borrowed. Upon being declared as bankrupt, the ownership and control of the corporation passes on from the equity holders to the debt holders who become the decision makers of its future course of action. List the four major financial statements required by the SEC for publicly traded firms, define each and explain why they are valuable. Four basic financial statement: 1. Balance Sheet. 2. Income statement. 3. Satement of retained earnings. 4. Statement of cash flows. Praimary purpose of preparinf the basic financial statement: 1. Balance Sheet: It shows the financial health of an entity. The praimary purpose of preparing Balance Sheet is to report the financial position of an entity at the end of a particular period. It includes the assets, liability, and equity of the company. 2.Income statement: The praimary purpose of income statement is to report the net income or the net loss of the entity. The net income or net loss is calculated by matching the expenses with the revenue. 3. Statement of retained earnings: The purpose of preparing retained earnings statement is to identify the effect of net income and distribution of dividend on the financial position of the company. 4. Satement of cash flows: The purpose of preparing satement of cash flows is to identify the inflow and outflow of cash for a partcular period. It catagorises the total activity in to operating, financing, and investing activities. It shows the net cash generated or used in each activitirs. Important financial statement: All the four basisc financial stsement is important for an enterprise, because all the four statement reflects the financial highlights of the company. But as the investment is concerned the income statement, and Balance sheet are the most important financial statement of the company. Because, the income statement shows the profitability of the entity, and the Balance Sheet shows the financial health of the company. An investor while investing in a company praimarily wants to know the profitabilty and the financial stability of the commpany. On itsbalance sheet,Maxidrive overstated the economic resources it owned and understated its debts to others. On itsincome statement,Maxidrive overstated its ability to sell goods for more than the cost to produce and sell them. On itsstatement of retained earnings,Maxidrive overstated the amount of income it reinvested in the company for future growth. On itsstatement of cash flows,Maxidrive overstated its ability to generate from sales of disk drives the cash necessary to meet its current debts. Define what is included in a management discussion and analysis section of a financial statement (that cannot be found elsewhere) Ch2.7 – 2CC Financial Statements (issued by a firm usually quarterly and annually) are accounting reports that present past performance information to provide a snapshot of a firm’s assets. In the US the public companies are required to file their financial statements with the US securities and Exchanges. Companies provide extensive notes with additional details on the information provided in the statements in addition to the four financial statements i.e. Balance Sheet, Cash Flow Statement, Income Statement, and Income Statement. The information that the notes to the financial statements are: They provide information related to a firm’s subsidiaries or its separate product lines. They show the detail of different types of debt the firm has outstanding and firm’s stock-based compensation plans for the employees. The notes are also contain the details of acquisitions, spin-offs, leases, taxes, and risk management activities. Off-balance sheet transactions do not appear on the balance sheet or the transactions or arrangements but they can have a material impact on a firm’s future performance. The off-balance sheet transactions are disclosed as part of the managerial decision and analysis (MDThe Four Major Types of Firm in the U.S.
CHAPTER 2 LITERATURE REVIEW 2.1 Introduction This chapter describes research that had been undertaken on selecting sanitary landfill site location and its factors that are suitable for the place. This literatures also included the models that can be used to predict the best location and also about the relation between and models and the GIS application. 2.2 Solid waste Solid wastes are all the wastes arising from human and animal activities that are normally solid and are discarded as useless or unwanted (Tchobanoglous et al., 1993). Solid waste also is the term to describe non-liquid waste materials from the public (Nair et al., 2007). Solid waste is one of the three major environmental problems in Malaysia and it plays a significant role in the ability of Nature to sustain life within its capacity (http://www.gecnet.info, 2002). Currently, over 23,000 tonnes of waste is produced each day in Malaysia. However, this amount is expected to rise to 30,000 tonnes by the year 2020 (Manaf et al., 2009). From that amount, only less than 5% of the waste is being recycled (http://www.gecnet.info, 2002). Based on study from Manaf et al., (2009) in Malaysia, there were three major categories of solid waste and each category is under the responsibility of a different government department. For municipal solid waste, it is the responsibility under Ministry of Housing and Local Government (MHLG). Department of Environmennt (DOE) will arranged the schedule or hazardous waste and the clinical waste is under the Ministry of Health (MOH). 2.3 Sanitary Landfill Landfill selection in an urban area is a critical issue in the urban planning process because of its enormous impact on the economy, ecology and the environmental health of the region (Akbari et al., 2008). As day from day, the growths of urbanization as well as the desire to live in cities, larger amount of wastes are produced and unfortunately the solid waste management problem became bigger (Akbari et al., 2008). Land filling has been used for many years as the most common method for the disposal of solid waste generated by different communities (Komilis et al., 1999). As Zyma (1990) mentioned that numerous factors have to be evaluated in order to place a landfill and then this adequate landfill should have minimum environmental impacts and social acceptance. Besides, an adequate landfill should be in accordance with the respective regulations (Zyma 1990). Yesilnacar and Cetin (2005) studies that the site selection procedure, however, should make maximum use of the available information and ensure that the outcome of the process is acceptable to most stakeholders. The planning and design of a solid waste landfill management system involves selection of treatment and disposal facilities, allocation of solid wastes and waste residues from the generator to the treatment and disposal sites, and selection of transportation routes (Yesilnacar and Cetin, 2005). Furthermore, many potential criteria, such as distance from residential areas, distance from main roads, investment costs, availability of solid waste, and land slope must be considered in the selection procedure of a landfill location . Landfill sitting also is a difficult and complex process requiring evaluation of many different criteria (Chang et al. 2007) since it has to combine environmental, economic and social factors. Environmental factors are very important because the landfill may affect the environment and the ecology of the surrounding area (Siddiqui et al. 1996; Kontos et al. 2003; Erkut and Moran 1991). Consideration of economic factors for landfills, it includes the costs development, operation of the site and also transportation of the waste (Delgado et al. 2008; Erkut and Moran 1991; Kontos et al. 2003). Social and political opposition to landfill siting have been indicated as the greatest obstacle for successfully locating waste disposal facilities (Lober 1995). The “Not In My Backyard” (NIMBY) and “Not In Anyone’s Backyard” (NIABY) phenomena (Chang et al. 2008; Kao and Lin 1996; Erkut and Moran 1991; Kontos et al. 2003; Lin and Kao 2005) are becoming popular nowadays because it create big problem to decision maker to choose the suitable place for sanitary landfill while nowadays is encounter insufficient of suitable land. It is evident that many factors must be consider in making decision for sanitary landfill sitting and geographic information systems (GIS) is an ideal tools for this kind of preliminary studies due to their ability to manage large volumes of spatial data from a variety of sources (Sener et al. 2006). 2.4 Geographical Information System Geographic information system (GIS) is a computerize database management system that designed to manage large volumes of spatially distributed data from a variety of sources (Charnpratheep et al., 1997). They are ideal for advanced site-selection studies because they efficiently store, retrieve, analyze, and display information according to user-defined specifications (Kao et al., 1997). GIS has been extensively used to facilitate and lower the cost of the landfill site-selection process (Sener et al., 2006). GIS often been employed for the siting and placement of facilities (Church, 2002). GIS has emerged as a very important tool for land use suitability analysis (Malczewski, 2004). GIS also can recognize, correlate and analyze the spatial relationship between mapped phenomena, thereby enabling policy-makers to link disparate sources of information, perform sophisticated analysis, visualize trends, project outcomes and strategize long-term planning goals (Malczewski, 2004). GIS as a box of tools for handling geographical data is very useful, however, the list of tools provided by GIS although impressive is not complete. For example in most GIS packages spatial analytical functionality, lies mainly in the ability to perform deterministic overlay and buffer functions (Carver, 1991). Such abilities whilst ideal for performing spatial searches based on nominally mapped criteria, are of limited use when multiple criteria and targets, such as in the case of landfills selection, are applied (Jeff and Baxter, 1996). The integration of GIS with analytical techniques will be a valuable addition in GIS toolbox. Progress in this area is inevitable and future developments will continue to place increasing emphasis upon the analytical capabilities of GIS (Fotheringham and Rogerson, 1994). GIS have the capability to handle and simulate the necessary economic, environmental, social, technical, and political constraints. Many of the attributes involved in the process of selection of sanitary landfill sites have a spatial representation, which in the last few years has motivated the predominance of geographical approaches that allow for the integration of multiple attributes using geographic information systems (Kontos et al. 2003; Sarptas et al. 2005; Sener et al. 2006; Gomez-Delgado and Tarantola 2006; Delgado et al. 2008; Chang et al. 2008). Site selection procedures can benefit from the appropriate use of GIS. Common benefits of GIS include its ability to: (a) capture, store, and manage spatially referenced data; (b) provide massive amounts of spatially referenced input data and perform analysis of the data; (c) perform sensitivity and optimization analysis easily; and (d) communicate model results (Vatalis and Manoliadis 2002). GIS also provides a spatial framework to land use analysis and it has been recognized as a useful decision support technology. The role of GIS is to generate a set of feasible solutions representing the relative land suitability with respect to any given map layers and to display it. Nevertheless, it does not provide means to deal with multiple decision factors. There has been a recent trend to integrate GIS with other software for better decision making in planning. 2.5 Previous Study on GIS in Sanitary Landfill Site Selection 2.5.1 Case Study in Iran (Akbari et al., 2008) According to Akbari et al., (2008) a good waste disposal area has few characteristics such as it should be away from the place which has the history of flooding. From previous study done by Allen et al., (2001), landuse, road and other environmental factor must be considered in selecting the suitable waste disposal area. In this study, raster-based and vector-based is used to identify potential waste sites based on suitability of topography and proximity to geographic features (Kier et al.,1993). In locating the suitable waste disposal area, this study was concern about public health. According to first stage, Akbari et al. (2008) in considering the high rate of urbanization, one should take the long term land use planning of suburbs into consideration to locate the disposal area. In this study also, Akbari et al. (2008) use the combining method. In the first stage, GIS used as the method to predict some of the unacceptable area based on criteria. Then, the study continues the analyzing by using fuzzy multicriteria decision making (Zadeh, 1965). For the parameter in this study, most of the criteria that has been used follow the previous study such as proper heigt and slope, faults, surface water sources, water wells, urban and rural area, agriculture area, road networks and coastal zone (Kamariah, 1998; Halvadakis, 1993; Vassiloglou, 2001) Result for this study as almost based on the second stage which is using Fuzzy Multicriteria Decision Making (Zadeh, 1965). FMCDM method is therefore chosen for ranking different landfill sites based on decisions given by a group of experts (Chang et al., 2007). 2.5.2 Case Study in China (Wang et al., 2008) GIS used as the main system in designing the suitable places for the sanitary landfill site. GIS has been extensively used to facilitate and lower the cost of the sanitary landfill site-selection process (Charnpratheep et al., 1997). Some of the siting technique combine GIS with the multiple criteria analysis (Kao and Lin, 1996; Lin and Kao, 1998) and for this case study, Wang et al., (2008) choose to use Analytical Hierarchy Process (AHP) as a decision making technique. Actually, AHP is often used to compare the relative suitability of a small number of alternatives concerning the overall goal (Wang et al., 2008). In this study, the criteria that been used is based on the relevant International literature (Kontos et al., 2005; Al-Jarrah and Abu-Qdais, 2006; Sener et al., 2006) and also regulation in China. For the criteria, Wang et al., (2008) split into two groups which is environmental criteria that limit to geographical areas. The second group is about economic factors. As mention in journal, the criteria that has been used for selecting suitable site are residential area, surface water bodies, ground waters, airport areas, land uses, slopes of land surface and roads. Wang et al., (2008) use the price of the land as the economic factor in selecting suitable site. Other criterion for the economic factor is the cost for the transportation. They lower the transportation cost by deciding the waste production center should be 500m from the main road. According to Wang et al., (2008) economic factor is important for developing countries and should be considered for solid waste landfill. From the overall study, integration of GIS with the multi criteria evaluation technique, AHP can be the best method for completing in selecting suitable site for the sanitary landfill. AHP gives some advantage for the user because it can provide large and many data in selecting suitable site (Charnpratheep et al., 1997; Chang et al., 2008). AHP also provided great flexibility in the aggregation procedure (Wang et al., 2008). 2.5.3 Case Study in India (Sumathi, 2005) In this case study, Sumathi et al, (2005) use the combination of GIS method and also MCDA or Multi Criteria Decision Method. A GIS-based MCDA integrates and transforms spatial and aspatial data into a decision. It involves the utilization of geographical data, the decision maker’s preferences and the manipulation of data and preferences to arrive at uni-dimensional values of alternatives (Sumathi et al., 2005). Consequently, it may be considered as a rather complex multi-criteria decision making process involving numerous stakeholders and public interest groups. Hipel (1982) proposed an earlier version of multi-criteria modeling incorporating fuzzy set theory to solve solid waste disposal problems in Canada. MCDA have primarily been employed to solve site selection problems in solid waste management (Vuk et al., 1991; Pereira and Duckstein, 1993; Hokkanen and Salminen, 1994, 1997). Kontos et al. (2005) described a methodology which comprises several methods from different scientific fields such as multiple criteria analysis, geographic information systems, spatial analysis and spatial statistics to evaluate the suitability of the study region in order to optimally site a landfill. Padmaja et al. (2006) identified a solid waste disposal site in Hyderabad city using an analytical hierarchy process and GIS. The criteria that has been used in this case study are, lake and ponds, rivers, water supply sources, groundwater table, groundwater quality, infiltration, air quality index, geology, fault line, elevation, land use, habitation, highways and sensitive sites. 2.5.4 Case Study in Sabah, Malaysia (Lunkapis, 2004) Study in Sabah by Lunkapis (2004) is using Geographical Information System (GIS) as decision support tool for landfills siting. Using only GIS as a tool for selecting landfill site still can give the ideal sites. From this study, the criteria used for this study is determine by following the guidelines produced by the Ministry of Environment Malaysia in 1995 and also the collaboration with the Sandakan Spatial Planning Working Group. In this study also, Lunkapis (2004) used the two major criteria which are constraints and factor that has been used for an ideal siting of landfills. The constraints were related to roads, open water, protected areas, urban, rural residential areas, soil permeability and soil type, land use and distance to transportation routes (Lunkapis, 2004). In this project, there were some problems regarding management issue and budget allocation. On one hand the advocate proposed that the existing landfill should be maintained due to the lack of funding to open a new one (Lunkapis, 2004). Lunkapis (2004) also said that the existing dumping site were large enough to cater for many years to come and the only requirement was the budget must be allocated for better management and maintainance. 2.6 Combining GIS with other method 2.6.1 GIS with Analytical Hierarchy Process (AHP) Siddiqui et al. (1996) were the first to combine geographic information system (GIS) and AHP procedure to aid in site selection. Similarly, Charnpratheep et al. (1997) utilized fuzzy set theory with GIS for the screening of landfill sites in Thailand. Chang et al. (2008) combined GIS and fuzzy multi-criteria decision-making for landfill siting in the suburban area of the City of Harlingen. Nema and Gupta (1999) proposed an improved formulation based on a multi-objective integer programming approach to reach the optimal configuration of a regional hazardous waste management system. Ishizaka and Tanaka (2003) discussed the risk for the waste disposal system in Japan, is considering public conflict in the site selection process. Recently, several publications have tackled landfill siting problems using GIS and multi-criteria analysis or intelligent system approaches in Greece, Turkey, and Jordan (Vatalis and Manoliadis, 2002; Kontos et al., 2005; Al-Jarrah and Abu-Qdais, 2005; Sener et al., 2006; Wang et al., 2008). 2.6.2 GIS with Multi Criteria Evaluation (MCE) Multi-criteria evaluation (MCE) is used to deal with the difficulties that decision makers encounter in handling large amounts of complex information. The principle of the method is to divide the decision problems into more smaller understandable parts, analyze each part separately, and then integrate the parts in a logical manner (Malczewski 1997). The integration of GIS and MCE is a powerful tool to solve the landfill site selection problem because GIS provide efficient manipulation and presentation of the data and MCE supplies consistent ranking of the potential landfill areas based on a variety of criteria (Sener et al. 2006). Higgs (2006) reported the potential of integrating multi-criteria techniques with GIS in waste facility location and documented through a review of the existing literature to highlight the opportunities and challenges facing decision makers at different stages of the waste facility management process. Vatalis and Manoliadis (2002) used GIS digital map overlay techniques in order to find the suitable landfill sites in Western Macedonia, Greece. Differing siting constraints were considered, and numerical and qualitative criteria were applied in their investigation. The resulting alternative sites were also evaluated using multi-criteria evaluation models. Lin and Kao (1998) developed a model which was applicable for vector-based data. Integrated with a GIS, the model was capable of processing digital spatial data to facilitate landfill siting analysis. Leao et al. (2001) described a method to quantify the relationship between the demand and supply of suitable land for waste disposal over time, using GIS and modeling techniques. Allen et al. (2003) have studied the development of a GIS model for locating landfill sites, an Interreg IIC funded by EU research project and conducted by a team of Irish and Portuguese engineering geologists, civil engineers, and GIS experts from universities and local government. The primary objective of the project has been reported so as to establish a transferable, trans-national GIS site selection framework that could be applicable throughout the European Union, thus creating a GIS landfill model for the location of new landfill sites over the next few years. 2.6.3 GIS with System Simulation Model (SSM) A performance-based design approach can provide more efficient and cost-effective solutions. Selection of landfill design components satisfying some predefined performance criteria is possible using geographic information systems (GIS) and system simulation models (SSM). Recently, with the help of new developments in the area of software technologies, integration of GIS and SSM technologies into expert systems or decision support systems has become important for landfill design applications (Lukasheh et al. 2001). GIS can efficiently handle databases and perform queries to analyze geographic data to be classified geologically and hydrogeologically, which can help landfill site selection (Lukasheh et al. 2001; Dorhofer and Siebert 1998). SSM like hydrogeologic evaluation of landfill performance (HELP) were developed to assist in the design of landfill elements. The integration of GIS and SSM in one unified system is stated to provide an interface for data storage, database access, and data display using the GIS and allow a single designer to accomplish a complete design and evaluation and provide with a predictive tool using SSMs (Lukasheh et al. 2001). 2.7 Chapter summary Based on this chapter, the most method that has been used by previous research is combining Geographical Information System (GIS) and Analytical Hierarchy Process (AHP). Basically, using only GIS software is enough to predict suitable places for sanitary landfill site. But to get more exact value for prediction, combining with the AHP is better. This is because AHP can combine many criteria in one time. More than that, using AHP can make the criteria that been use for prediction more flexibility depends on the scaling weighting. Combing GIS with AHP also is a better method because if use GIS only, the raw data may only came from map, but AHP can join map and also other data such as economic factor as the scaling weighting.

Differences Between Experimental and Non Experimental Designs Paper

Differences Between Experimental and Non Experimental Designs Paper.

Discussion Experimental versus Non-experimental Quantitative Research [WLOs: 1, 2, 3] [CLOs: 3, 4, 5]To prepare for this discussion, read the instructor guidance, and Sections 2.2, 2.3, 2.4, 3.3, “Steps” in Section 3.4, 3.5, 4.3, and Chapter 5 of the Newman (2016) textbook.In contrast to qualitative designs, which are all basically non-experimental and descriptive, quantitative research designs may be either experimental or non-experimental. Within the non-experimental category, descriptive and correlational research are sub-categories.Using the Ashford University Library databases, look for a scholarly/peer-reviewed quantitative research study on the topic you selected in Week 1. In your initial post,Appraise the differences between experimental and non-experimental research.Differentiate between a correlational study and an experimental study.State the hypothesis being tested in the selected quantitative research study.Identify the major variables and categorize them as independent or dependent.Describe the methods and results of the study.Determine whether the study is descriptive, correlational, or experimental, and explain why it fits this classification.Document your sources in APA style (Links to an external site.)Links to an external site., with in-text citations and references listed at the end of the post. For additional guidance see the Citing Within Your Paper (Links to an external site.)Links to an external site. and Formatting Your References List (Links to an external site.)Links to an external site. resources from the Ashford Writing Center.
Differences Between Experimental and Non Experimental Designs Paper

For this assignment, choose a peer-reviewed article to review. Find an article about international human resource management (IHRM) that is of interest to you and covers the multinational manager trai

essay writing service free Find an article about international human resource management (IHRM) that is of interest to you and covers the multinational manager training topics from this unit. The article you choose must be at least two pages in length and be written within the last five years. Write a two-page review of the article that includes the following information. Briefly introduce and summarize the article. Identify the author’s main points. Who is the author’s intended audience? Discuss the corporate cultural elements addressed in the article as they pertain to training multinational managers. Is enough being done in this area to properly train multinational managers? Identify legal concerns that may exist for IHRM in training multinational managers. Does the information from the article support the information in your textbook, or are there differences? Your completed article review must be at least two pages in length. You are required to use at least two outside sources, one of which must be the article you reviewed. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying APA citations.

Impact of Social Media Addiction on Mental Health Discussion

Impact of Social Media Addiction on Mental Health Discussion.

Purpose: Craft an essay that synthesizes your research. At this point, your goal is to present the dominant claims—found in your research—about your selected topic. Your goal is not to agree or disagree with the authors that you include in your essay; however, you will have the opportunity to incorporate your own views about the topic in the concluding paragraph.Tasks: Use your Assignment 4.1 submission in order to craft a cohesive review of your selected sources about a specific topic. Your essay should contain an introduction, conclusion, and at least three body paragraphs.The introduction must contain a thesis (e.g., what “research” specifically informsreaders about the selected topic). The introduction, an overview of your research,should outline the specific topic that you are addressing and its importance to readers.In the body paragraphs, address 3-5 specific claims that surfaced in your research; notewhether these claims are consistent in all of your research or whether disagreement (ora difference in focus) exists. Ensure that topic sentences are specific claims and thatparagraphs are well-developed with textual examples (that are properly cited).The conclusion should contain a restatement of the thesis—as well as recommendationsfor the future (in terms of research or social/cultural changes). In the conclusion, takethe opportunity to share your own personal view about the topic and/or ideas that areexpressed in your research.Read your essay again, and refer back to the More About the Synthesis Essay Assignment page to make sure your essay meets these requirements.Make sure you leave enough time to submit your draft to Smarthinking/Free Tutoring for review on thesis and content development – do this as many times as needed.Criteria on which you will be graded: A good grade on this assignment (the Rough Draft) reflects that you have completed this assignment to specifications. It does not mean that your final paper will earn the same grade. Your instructor may highlight instances of editorial errors; and, while points will not be deducted for grammar, spelling, and plagiarism mistakes here, incomprehensible writing will not earn a “passing grade.”Rough drafts will graded on content (claims, supporting arguments)Rough drafts will be graded on organization and logic (transitions, flow)Rough drafts will be graded on engagement with the texts and how you engage them in conversationPoints may be deducted if the following format is not followed:On the first page of your assignment, include your name, date, and assignment nameFont format: 12pt in a standard serif font such as Times New Roman, double spacedSubmit your assignment as a Word DOC or DOCX file to the Assignment BoxTHIS IS MY ARTICLE POST FROM ASSIGNMENT 4.1 The article I chose was “Social media addiction: its impact, mediation, and intervention”. Social media can cause individuals to feel the need to become overly concerned about social media. Emotional, relational, health, performance problems are all closely associated with social media addiction. I agree with the author’s claims that social media is addictive and can cause multiple problems to arise. Yes, I did have some prior knowledge of social media addiction. I knew that addiction to social media starts with teenagers. I do believe the author handled the topic well because it was so detailed.
Impact of Social Media Addiction on Mental Health Discussion

research paper on Hypotensive techniques for the obstetrics patients

research paper on Hypotensive techniques for the obstetrics patients.

Instructions:During their presentation they must present a
summary of the important data of their work written in 40mins. In it you
must describe and show the existing problems of your research. It is
important to get the attention of the viewers and bring the real problem
and be emphatic in your demonstration. For thatThey must include the following content:1. Cover (Name of the institution, Topic and name of the researchers)2. Introduction3. Definitions of Terms4. Epidemiology (To have statistics on the subject)5. Justification of the investigation6. Objectives (General and Specific)7. Methodology (Study design, study universe (population), inclusion and exclusion criteria and study variables)8. Statistical analysis9. Quality control of data10. Ethical Aspects11. Strengths and limitations of the study12. References in APA format13. Some minimum of 15 sources. At least from 201514. 25 pages TopicHypotensive techniques for the obstetrics patients
research paper on Hypotensive techniques for the obstetrics patients